Recently, a customer has feedback on the problem of colored fiber on the cloth, and sent a sample of the cloth. Observed under a magnifying glass, I can barely distinguish several light-colored fibers on the cloth. After dismantling analysis, the foreign fibers are all single colored fibers. There are two possible reasons for the formation of this single color fiber:
The first is that it exists in the raw material;.
Second, it is attached during the yarn production process.For example, few heterochromatic fibers are mixed in the raw materials.After mixing and drawing in various processes, the foreign fibers in the single-fiber state are mainly formed; resulting in poor cleaning of the site, such as the classification room. 4. The inside of the cotton disc grabbing machine with clear flowers; the container is not clean, the semi-finished products are not properly isolated from the outside world, and the time of naked exposure is too long; during the production process, the color spinning varieties are arranged adjacently and the isolation measures are not in place. After the production of the previous variety, the cleaning work was not thorough enough, and the channels accumulated and hung flowers. The spun bellows flowers contained colored fibers and were put into other varieties; a single fiber floating in the air drifted in. The control of a single colored fiber is difficult, and it is not easy to inspect and remove the clear flower foreign fiber machine and self-lubricating electrical cleaning, so it is necessary to strengthen the control of foreign fiber:
The heterogeneous fibers and colored fibers sandwiched in the raw materials are selected and checked by the bag-by-bag inspector and the catcher on duty.The raw materials with many foreign fibers and many colored fibers are definitely not used; clean the classification room and disc thoroughly before mixing Guaranteed no dead angles, and other parts inside the disc cotton grabbing machine before changing the spinning to ensure that there are no different-color fibers and miscellaneous flowers.
Clean all kinds of containers in time, including the accumulation of flowers in the sliver cans, and adopt isolation management measures for different varieties of semi-finished products and containers. The machine is isolated separately to prevent the color fibers from floating in the air; Similar, the principle of adjacent machines is the principle, the color change of the front and rear varieties requires close color; before the variety is changed, thoroughly clean the machine to ensure that the surface of the machine and the drafting channels are clean and free of hanging flowers. Do not tap when cleaning Airflow in the workshop to prevent flying flowers; strictly control the supply of product reserves, reduce the exposure time of semi-finished products, and prevent airborne color fibers from drifting in; inspect each bobbin in a timely manner during packaging; reasonably set the process of removing foreign fibers by electric cleaning parameter.






