With the continuous pursuit of functionalization of clothing, polyester filaments, as raw materials for clothing, have also continued to develop in the direction of fine denier and super fine denier. The fine yarn has a monofilament linear density of less than 1.0 dtex, and it is difficult to process on a general texturing machine. Manufacturers generally modify the equipment on the basis of the original production line, such as using dual network processing, efficient heat transfer non-contact heating device, and full online tension detection and automatic compensation system, etc., and optimize process conditions with minimal investment Cost, producing products that the market needs and customers are satisfied with.
According to market needs, the author produced 55dtex / 144f ultra-fine denier polyester DTY by optimizing the production process on the FK6-1000 texturing machine.
1 test
1
Raw materials 75dtex / 144f polyester POY: melt-spun, breaking strength 2.37cN / dtex, breaking elongation 118.1%, dryness unevenness 2.63%, produced by Jiangsu Hengli Chemical Fiber Co., Ltd.
2
Main equipment and testing instrument FK6-1000 texturing machine: made by Barmag, Germany; FPAME type stretch tester: made by Textechno, Germany; UT4-BASECX strip tester: made by Uster, Switzerland; DynafilME dynamic thermal stress tester: Made by Germany Textechno.
3 Production process Using 75dtex / 144f polyester POY as raw material, optimizing production process parameters (such as processing speed, stretching multiple, stretching setting temperature, etc.) on the texturing machine can produce 55dtex / 144f polyester DTY with excellent quality.


In conclusion
a. FK6-1000 texturing machine can produce polyester superfine denier DTY with a linear density of less than 0.5dtex. The production of 55dtex / 144f ultra-fine denier polyester DTY products has a first-class dyeing rate of about 95%, good product quality, full and fluffy product styles, and meet customer requirements.
b. 55dtex / 144f super fine denier polyester DTY superior process parameters: processing speed 600 ~ 700m / min; box temperature 170 ~ 185 ℃; drawing multiple 1.65; D / Y is 1.60; network pressure is 0.12MPa; The feeding rate was 4.00% to 5.50%.
c. Aiming at the phenomenon that the ultra-fine denier polyester DTY yarn has a lot of broken ends during processing, the dirt in the guide, the friction disk and the hot box should be removed, the first hot box temperature should be reduced, the processing speed and D / Y to reduce the ratio of untwisting tension and twisting tension.






