Oct 10, 2019 Leave a message

Grasp the cause of insertion and solve the problem of insertion of elastic cover card clothing

Elastic flat card clothing is an important carding equipment on the rotary flat of carding machine. It acts with the metal card clothing on the cylinder in the carding process, decomposing the bundle of fibers into a single fibre state, and eliminating impurities and short fibers at the same time. In the actual production process, due to the influence of impurity in raw materials, process removal, process coordination and management, there are problems such as damage, inverted needle, random needle, stripping, rust, and so on, which affect the carding effect. Therefore, the author discussed the problem of needle insertion in order to effectively control its occurrence.


Causes of Filling and Embedding of Elastic Cover Card Clothing


Self-Defects of Elastic Cover Card Clothing


Roughness of grinding needle

The forming process of comb needle for elastic cover card clothing is mainly realized by grinding needle. Double convex needle body steel wire is formed by side grinding, flat grinding and pressing of the needle grinder. The abrasive particle size of the grinding wheel is gradually finer, and the roughness of the side of the comb needle is gradually reduced. If the abrasive is not properly controlled, the two sides of the comb needle will form rough strip abrasion marks.


Quenching and oxidation of comb needle

Tip quenching can improve the metallographic structure of the needle tip to obtain good hardness. When quenching, the needle tip is heated rapidly and cooled rapidly in the cooling medium. However, heating makes the iron element in the needle tip react with oxygen in the air to produce oxides, which affects the surface roughness of the comb needle.


Surface defect of comb needle

There are cracks, cracks, delamination, pits and other defects on the surface of the comb needle, which are not easy to remove when side grinding the tip of the needle, because new cracks and pits will appear on the new grinding surface; serious segregation of carbon elements and uneven quenching will lead to poor roughness of the surface of the comb needle; poor formation of anti-rust oil film on the surface of the comb needle, resulting in rough iron oxide on the surface of the tip; excessive spraying of anti-rust oil; The fibers adhering to the surface of the comb needle are not easy to fall off and twist, forming hanging flowers.


Non-uniform elasticity and larger front angle

The uneven hardness and elasticity of material steel wire lead to different needle planting angles on card clothing, and point hanging flower is easy to appear. In addition, because the base cloth and comb needle are elastomers, the planting angle between the comb needle and the base cloth becomes larger after the force is applied. When the front angle of the comb needle after stretching is close to the theoretical angle, if the holding force is insufficient to make the angle change too large to reach the design value, it will cause hanging flowers.


Poor sharpness of needle tip

The sharp needle tip has strong puncture and carding ability to the fiber bundle, which is conducive to separating the bundle fibers into single fibers, and is not easy to knead and extrude the fibers. At this time, the tension of the needle tip by the fibers is small, and the change of the front angle is small, so the clothing is not easy to hang flowers and fill.


Poor clarity of needle implantation

Needle planting requires uniform arrangement on the base cloth, without high or low needles, elevation and random needles; otherwise, in the process of carding, the needle will not be uniformly loaded, resulting in inlay and hanging flowers.


Raw material fibers contain too much sugar and impurities

The main factor affecting the surface roughness of fibers is the sugar content of the fibers. If the sugar elimination measures are insufficient, the viscosity of the fibers increases and the spinnability of the fibers is poor. As a result, the fibers are not easy to fall off on the surface of the comb needle and become entangled, forming hanging flowers.


Impurities can not be eliminated in time, embedded between the comb needle or between the comb needle and the bottom cloth, resulting in inlay; the impurity of raw materials is large, the process behind the taker-in roller or the unraveling and cleaning of cotton is unreasonable, and the inlay of impurities is not timely, so when the impurities of raw materials are excessive, the amount of cotton dropping should be increased accordingly.


Improper selection of card clothing

The needle body of card clothing with elastic cover has straight needle and bending needle. The transfer effect of straight needle is good but the control ability is weak. The control ability of bending needle is strong and the transfer effect is worse than that of straight needle. When carding different fibers, needle clothing with different needle bodies should be selected. For example, carding chemical fibers needs to strengthen the transfer ability. In general, straight needle clothing should be selected. If bending needle clothing is selected, the problem of inlaying will arise. Comb needle planting forms are different, and the ability to control fibers is also different. When combing fibers with large static electricity or impurities, choosing too large needle density will also cause needle insertion.


Improper process configuration

In the carding process, the elastic cover card cloth and the cylindrical card cloth hold the fibers to make them stretch continuously, the fiber layer squeeze continuously between the needle surfaces, and the carding needle is subjected to carding force, which causes damage to the base cloth and the needle root by the force couple balance. Although attention should be paid to the carding process concept of tight gauge and strong carding in the carding process, too small gauge configuration will make the fibers bear greater carding force between needle surfaces and cause the fibers to sink into the needle root and be embedded.


Dust removal and impurity removal are not smooth

Dust removal equipment is an auxiliary equipment of carding machine. With the development of carding machine to high speed and high yield, impurity removal after impurity removal has become one of the main technological problems. Although the carding machine has the process of removing and collecting impurities, if there are problems in cleaning and stripping and suction system, it will lead to problems such as not sucking away, insufficient negative pressure at the negative pressure point of the machine table, which will affect the transfer and result in inlay.


Improper management and maintenance

The improper use and management of card clothing causes problems such as damage, random needle, inverted needle, chamfer, non-sharp, rusty hanging flower, unstable base cloth and unclean cloth, and even the needle cloth is miscellaneous. Only using and not maintaining can cause gradual miscellaneous insertion; poor relative humidity control or improper storage of card cloth can also cause miscellaneous insertion; poor floating effect of cover plate can cause miscellaneous insertion.


Injury of Card Clothing

Causes of inlay caused by card clothing damage, such as fixed rack cover, doffer, taker-in roll, cylindrical winding and other reasons or transfer is not smooth, resulting in inlay of cover plate. Especially the damage of taker-in roll and rear fixed rack cover plate results in the decrease of pre-combing effect. When the fiber bundle enters the main combing zone, the fiber aggregate and the cotton bundle are larger, resulting in the increase of local combing resistance, which causes the fiber or impurity to sink into the root of the tooth and cause the embedding.


Improper temperature and humidity management

The excessive relative humidity in the workshop results in the rust and miscellaneous hanging and embedding of card clothing. Especially in the process of carding colored chemical fibers, functional fibers or differential fibers, improper local humidification is used to control static electricity, so that spraying or spraying water enters the carding area, resulting in miscellaneous embedding.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry