1. When the machine is used as a blank or joint part, it must be able to take out each core in the machine from the tank. The yarn and spandex components also have to be synchronized during production. Special attention should be paid to the fact that the wire cannot be pulled directly from the tank for production. During production, the unwinding position of the core must be ensured and the problem of low inventory must be checked.
2. When the double-twisting machine has a very serious hook drop, it must be discovered by maintenance personnel and must not be used anymore to avoid further problems.
3. Workers should be careful not to cut the wire directly on the twisted wire. If a problem occurs during production, the machine must be restarted and must be completely interrupted to reprocess raw materials, avoiding a direct start-up. Or check whether there is wrapped yarn at the joint position. If there is any tangled yarn, it should be cleaned up in time.






