Since the 21st century, new flat-bottom energy-saving spindles have been widely used in foreign spinning companies. Taking Pakistan as an example, the proportion of flat-bottomed spindles is over 90%, the average spindle speed is about 20000r/min, the level of spinning technology and equipment is generally high, and the low labor cost and other factors have obvious advantages in spinning cost.
1. Reasons for the low rate of flat-bottom energy-saving spindles in the domestic spinning industry
First of all, textile enterprises in most developing countries in Asia are basically adopting Western advanced sets of equipment when their domestic spinning equipment manufacturing industry is relatively backward and the industrial chain is incomplete.
Spinning equipment and components, flat-bottomed spindles are therefore used indirectly by large stars. China's spinning equipment manufacturing industry chain is relatively complete, the textile industry from 2000 to 2010 ten
Year-old expansion, spinning companies use a wide range of domestic equipment, due to fierce competition in the domestic spinning machine market, in order to reduce the price of the whole machine, the domestic spinning machine manufacturers put the traditional spindle
As a standard component, if the user requests an increase in configuration, it must be indicated in the contract.
Secondly, the domestic textile machinery component industry is relatively late in research and development of flat-bottom energy-saving spindles, and the processing technology and processing precision are further affected by the technical level of mechanical manufacturing equipment.
Due to factors such as low investment and insufficient investment, the progress of research and development has been seriously affected. It was not until 2006 that systematic research on the true meaning of flat-bottomed high-end spindles began.
And development, resulting in the production of domestic flat-bottomed spindle manufacturing technology is relatively late, the launch time is also late.
Once again, domestic spinning companies have been in contact with and used ordinary sharp-bottomed spindles for decades, and have not understood enough about the structure and performance of flat-bottomed energy-saving spindles.
Use and cheap, continue to use the sharp bottom spindle, holding a wait-and-see attitude on the flat-bottomed spindle.
China Yarn Net has become China's new spinning technology exchange platform. It has held many technical exchange meetings between spinning enterprises and textile machinery enterprises. The flat bottom spindles have begun to receive more and more:
The attention of spinning companies has been adopted by more and more companies. China Yarn Net and Industry Association promotes the use of flat-bottomed spindles in China and improves the configuration of spinning enterprises
The level has made an outstanding contribution. At present, about 15% of spinning companies are starting to try flat-bottomed spindles, and 10% of spinning companies are already using them in large quantities.
2. Energy-saving advantages of new flat-bottom energy-saving spindles
Flat-bottomed high-speed energy-saving spindles first appeared in Germany in the 1980s. Due to its advanced structure and good mechanical manufacturing technology, this spindle quickly occupied the international market, and the world's spinning technology was rapidly improved. The spindle spindle degree exceeded 18000r/min, and the spinning production efficiency and energy saving advantages. obvious.
The spindle structure is very scientific from the perspectives of theoretical mechanics, tribology, fluid dynamics, etc. It is a major breakthrough in the basic structure of the sharp ingot bottom that has lasted for hundreds of years, and almost solved all the shortcomings of the traditional sharp bottom spindle structure.

3.New flat bottom spindle energy saving principle
When the spindle is running at high speed, the parts in the lower part of the spindle that are in contact with the spindle (such as the bearing and the bottom of the spindle) and the lubricating oil are also rotated at a relatively high speed. Due to the mutual friction, the spindle will consume a lot when it rotates at a high speed. Energy, after testing and analysis, this part of the energy consumption accounts for about 30% of the average single spindle energy consumption of the spinning machine.
The spindle tip friction torque M is proportional to the sum of the weight of the spindle and the spool, and is proportional to the friction coefficient between the spindle tip and the spindle bottom compared to the spindle tip friction radius. The lower tip of the ordinary spindle is R=0.7mm(-), which is in contact with the bottom of the spindle R=0.7mm( + ); the spherical surface of the spindle below the flat spindle is in point contact with the plane of the bottom of the spindle, and the lubrication is sufficient, so the lower frictional resistance torque of the spindle Very small, almost zero energy consumption.
Energy saving by reducing the speed of the scroll
The inner diameter of the bearing on the flat bottom spindle is 6.8mm, and the diameter of the spindle can be designed to be smaller. At the same speed, the rotation speed of the rolling plate can be reduced, and the energy consumed by the air resistance can be reduced. The rotational resistance of the rotating object is proportional to the third power of the object's rotational speed. By calculation, the disk energy consumption ratio is W32/W31=0.80 (0.64) compared to a spindle with a spindle pulley diameter of φ19 mm and φ20.5 mm (or 22 mm). However, this part of the energy consumption accounts for about 5% of the total energy consumption of the spinning machine. The theoretical calculation of the rolling disk energy consumption is very close to the spinning disk energy consumption. According to the spinning machine spinning, the average power consumption per spindle is 20 watts/ingot. The rolling plate energy consumption is 1 watt/ingot per spindle. Considering only the spindle factor, the spindle with φ19mm spindle is 20.5mm and The spindles of the 22mm spindles reduce the yarn energy consumption by 1% and 1.8%, respectively.






